Fusion5s 2.0 Office Network Booster
FREE SHIPPING
(with $100 minimum purchase)
Improve your cell signal for all US carriers inside any large home or mid-size building up to 10,000 square feet. The Fusion5s 2.0 network booster for home boosts voice, text and data signals on 5G/4G LTE devices, including MiFi hotspots and cellular data hubs. It reduces dropped & missed calls and improves data speeds to ensure everyone has a reliable connection to their mobile device. Fusion5s 2.0 provides clear and consistent coverage for all cellular devices with powerful boosting technology to maintain your connection throughout the weakest signal environments.
- Designed to improve cell signal in large homes or mid-sized buildings up to 10,000 sq. ft.
-
Boosts voice, text and data signals for all North American carriers
-
Supports multiple simultaneous users
-
Reduces missed & dropped calls and increases data speeds
-
Works with all cellular devices, including hotspots, while extending their battery life
-
5G compatible– Fusion5s 2.0 supports all 5G/4G LTE devices
-
Designed, assembled and tested in the USA
-
Industry best 3-year warranty and lifetime US-based tech support
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
Input/Output Impedance: | 50 Ohm |
Maximum Gain: | 72 dB |
Max Downlink Power: | +13 dB |
Noise Figure: | 8 dB |
AC Power Transmitter: | Input AC 110 V, 60 Hz / Output DC 12 V |
Maximum Output Power: | 1 Watt EIRP |
Cable: | SC-400 |
RF Connectors: | N Female (both ends) |
Power Consumption: | <25W |
Dimensions: | 9.25" x 6.375" x 1.375" |
Weight: | 4 lb. |
FCC (USA): | RSNFUSION5S-X20 |
Download User Manual | Download Data Sheet |
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
Fusion5s 2.0 Office Network Booster
Improve your cell signal for all US carriers inside any large home or mid-size building up to 10,000 square feet. The Fusion5s 2.0 network booster for home boosts voice, text and data signals on 5G/4G LTE devices, including MiFi hotspots and cellular data hubs. It reduces dropped & missed calls and improves data speeds to ensure everyone has a reliable connection to their mobile device. Fusion5s 2.0 provides clear and consistent coverage for all cellular devices with powerful boosting technology to maintain your connection throughout the weakest signal environments.
- Designed to improve cell signal in large homes or mid-sized buildings up to 10,000 sq. ft.
-
Boosts voice, text and data signals for all North American carriers
-
Supports multiple simultaneous users
-
Reduces missed & dropped calls and increases data speeds
-
Works with all cellular devices, including hotspots, while extending their battery life
-
5G compatible– Fusion5s 2.0 supports all 5G/4G LTE devices
-
Designed, assembled and tested in the USA
-
Industry best 3-year warranty and lifetime US-based tech support
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
Input/Output Impedance: | 50 Ohm |
Maximum Gain: | 72 dB |
Max Downlink Power: | +13 dB |
Noise Figure: | 8 dB |
AC Power Transmitter: | Input AC 110 V, 60 Hz / Output DC 12 V |
Maximum Output Power: | 1 Watt EIRP |
Cable: | SC-400 |
RF Connectors: | N Female (both ends) |
Power Consumption: | <25W |
Dimensions: | 9.25" x 6.375" x 1.375" |
Weight: | 4 lb. |
FCC (USA): | RSNFUSION5S-X20 |
Download User Manual | Download Data Sheet |
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
Customer Reviews
-
Works great in the cabin
We needed a cell amp system for our two story cabin way out in the woods. Works great with all phones.