

“The new Fusion2Go 3.0 NMO Fleet is designed to outperform other in-vehicle cell signal boosters with twice the output power and significantly faster data speeds.”
-POLICE Magazine
Keep your fleet of vehicles connected throughout the most challenging signal areas with the Fusion2Go 3.0 Fleet, the most powerful cell phone signal booster for commercial drivers, boundary pushers, law enforcement, or public safety officials who require a fixed antenna solution. This Fleet model is kitted with a non-magnetic option (NMO) outside antenna that permanently and securely mounts to any vehicle, enabling it to withstand the most rugged conditions. The Fusion2Go 3.0 Fleet provides the maximum gain and power possible for an in-vehicle cell phone signal booster for strong and reliable 5G/4G LTE connectivity. Featuring 2XP technology for twice the uplink transmission power, the Fusion2Go 3.0 Fleet is the best permanently mounted booster for maintaining cell signal at the fringe of cell tower networks and beyond.
Supports multiple simultaneous users
Works with all North American carriers
Compatible with all cellular devices, including hotspots, while extending battery life
5G compatible - Fusion2Go 3.0 supports 4G and 5G devices
2XP technology offers 2x uplink power for best performance in the most rural/remote areas
High quality materials for longevity and connectivity when you need it
Designed, assembled and tested in the USA
Industry best 3-year warranty and lifetime US-based tech support
Note: The permanent nature of the NMO antenna may require the assistance of a professional installer, as there will need to be a small ¾" hole drilled into the roof of the vehicle to run the antenna cable between the NMO antenna and the signal amplifier.
Part Number: | SC-Fusion2Go3-NMO |
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
Input/Output Impedance: | 50 Ohm |
Maximum Gain: | 50 dB |
Max Uplink Power: | 29 dBm |
Noise Figure: | ≤5 dB |
VSWR: | ≤2.0 |
Gain Adjustment: | 20 dB (Automatic) |
Maximum Output Power: | 1 Watt EIRP |
DC Power: | 6-15V |
Cable Type: | RG-58U (Outside) / SC-174 (Inside) |
Outside NMO Antenna Cable: | 17 feet |
Inside Patch Antenna Cable: | 10 feet |
Hardwire Power Supply Cable: | 18 feet |
RF Connectors: | FME male (both ends) |
Power Consumption: | <10W |
Operation Temperature: | -4ºF to +158ºF |
Dimensions: | 5.625" x 4" x 1.125" |
Weight: | 1.43 lbs |
![]() |
![]() |
![]() |
Download User Manual | Download Quick Install Guide | Download Data Sheet |
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
“The new Fusion2Go 3.0 NMO Fleet is designed to outperform other in-vehicle cell signal boosters with twice the output power and significantly faster data speeds.”
-POLICE Magazine
Keep your fleet of vehicles connected throughout the most challenging signal areas with the Fusion2Go 3.0 Fleet, the most powerful cell phone signal booster for commercial drivers, boundary pushers, law enforcement, or public safety officials who require a fixed antenna solution. This Fleet model is kitted with a non-magnetic option (NMO) outside antenna that permanently and securely mounts to any vehicle, enabling it to withstand the most rugged conditions. The Fusion2Go 3.0 Fleet provides the maximum gain and power possible for an in-vehicle cell phone signal booster for strong and reliable 5G/4G LTE connectivity. Featuring 2XP technology for twice the uplink transmission power, the Fusion2Go 3.0 Fleet is the best permanently mounted booster for maintaining cell signal at the fringe of cell tower networks and beyond.
Supports multiple simultaneous users
Works with all North American carriers
Compatible with all cellular devices, including hotspots, while extending battery life
5G compatible - Fusion2Go 3.0 supports 4G and 5G devices
2XP technology offers 2x uplink power for best performance in the most rural/remote areas
High quality materials for longevity and connectivity when you need it
Designed, assembled and tested in the USA
Industry best 3-year warranty and lifetime US-based tech support
Note: The permanent nature of the NMO antenna may require the assistance of a professional installer, as there will need to be a small ¾" hole drilled into the roof of the vehicle to run the antenna cable between the NMO antenna and the signal amplifier.
Part Number: | SC-Fusion2Go3-NMO |
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
Input/Output Impedance: | 50 Ohm |
Maximum Gain: | 50 dB |
Max Uplink Power: | 29 dBm |
Noise Figure: | ≤5 dB |
VSWR: | ≤2.0 |
Gain Adjustment: | 20 dB (Automatic) |
Maximum Output Power: | 1 Watt EIRP |
DC Power: | 6-15V |
Cable Type: | RG-58U (Outside) / SC-174 (Inside) |
Outside NMO Antenna Cable: | 17 feet |
Inside Patch Antenna Cable: | 10 feet |
Hardwire Power Supply Cable: | 18 feet |
RF Connectors: | FME male (both ends) |
Power Consumption: | <10W |
Operation Temperature: | -4ºF to +158ºF |
Dimensions: | 5.625" x 4" x 1.125" |
Weight: | 1.43 lbs |
![]() |
![]() |
![]() |
Download User Manual | Download Quick Install Guide | Download Data Sheet |
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.