Flare - In-Home & Office Cellular Signal Booster
Get better cell signals for all US cell carriers inside any home, cabin, small building or office up to 2,500 square feet. Flare’s in-home and office cellular signal booster features 2XP technology which doubles uplink transmission power to connect homes and small buildings with reliable 5G/4G LTE data coverage in remote/rural areas. The Flare cell phone service amplifier is trusted by thousands of customers across the US for its huge boosting power in a compact, streamlined package. This multiple award-winning signal booster features an external omni-directional antenna and a booster with an omni antenna all in one attractive housing that creates a 'null zone' allowing it to provide more coverage than other traditional in-home cellular signal booster designs.
- Designed to improve cell signal in small homes, cabins, buildings or offices up to 2,500 sq. ft.
-
Works with all North America carriers
-
Reduces missed and dropped calls and increases 5G/4G LTE data speeds
-
2XP technology delivers 2x uplink power for best performance in the most rural/remote areas
-
Supports multiple simultaneous users
-
Compatible with all cellular devices, including hotspots, while extending their battery life
-
5G compatible - Flare supports 4G LTE and 5G devices
-
Simple to set up with all components included for a light DIY install
-
Assembled and tested in the USA
Part Number: | SC-Poly-DT-O-Kit |
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Donor/Server Port Impedance: | 75 Ohm / 50 Ohm |
Maximum Gain: | 72 dB |
Max Uplink Power: | 26 dBm |
Noise Figure: | 7 dB |
VSWR: | ≤2.0 |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards |
AC Input: | Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A |
Maximum Output Power: | 1 Watt EIRP |
Cable: | RG-6 (50 ft) |
RF Connector: | F-Female |
Power Consumption: | <12W |
Weight: | 1.81 lb |
Dimensions: | 5.125" × 7.25" × 5.625" |
Download User Manual | Download Quick Install Guide | Download Data Sheet |
Flare - In-Home & Office Cellular Signal Booster
Get better cell signals for all US cell carriers inside any home, cabin, small building or office up to 2,500 square feet. Flare’s in-home and office cellular signal booster features 2XP technology which doubles uplink transmission power to connect homes and small buildings with reliable 5G/4G LTE data coverage in remote/rural areas. The Flare cell phone service amplifier is trusted by thousands of customers across the US for its huge boosting power in a compact, streamlined package. This multiple award-winning signal booster features an external omni-directional antenna and a booster with an omni antenna all in one attractive housing that creates a 'null zone' allowing it to provide more coverage than other traditional in-home cellular signal booster designs.
- Designed to improve cell signal in small homes, cabins, buildings or offices up to 2,500 sq. ft.
-
Works with all North America carriers
-
Reduces missed and dropped calls and increases 5G/4G LTE data speeds
-
2XP technology delivers 2x uplink power for best performance in the most rural/remote areas
-
Supports multiple simultaneous users
-
Compatible with all cellular devices, including hotspots, while extending their battery life
-
5G compatible - Flare supports 4G LTE and 5G devices
-
Simple to set up with all components included for a light DIY install
-
Assembled and tested in the USA
Part Number: | SC-Poly-DT-O-Kit |
Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
Donor/Server Port Impedance: | 75 Ohm / 50 Ohm |
Maximum Gain: | 72 dB |
Max Uplink Power: | 26 dBm |
Noise Figure: | 7 dB |
VSWR: | ≤2.0 |
Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards |
AC Input: | Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A |
Maximum Output Power: | 1 Watt EIRP |
Cable: | RG-6 (50 ft) |
RF Connector: | F-Female |
Power Consumption: | <12W |
Weight: | 1.81 lb |
Dimensions: | 5.125" × 7.25" × 5.625" |
Download User Manual | Download Quick Install Guide | Download Data Sheet |